Cementitious Grouts
SmartNS Grout GP
High Fluidity Non-Shrink Grout
SmartNS Grout GP is formulated for use in critical applications requiring controlled and precise expansion of the grout. It contains only graded sand, cement and an expansion agent with high flow-ability and non-staining characteristics. SmartNS Grout GP is the ideal product for all type of grouting needs. It is extremely flow-able for gap widths of 10 to 100 mm. When cured, it is similar in appearance to concrete.
-
More Info
FIELDS OF APPLICATION
SmartNS Grout GP is used for free-flow, positive expansion grouting in a wide range of applications such as :
- Structural members such as precast wall panels, beams and columns, post-tension girder
- Hand rails
- Anchor bolts
- Base plates
- Machine base of all types
- Pressure grouting
- Concrete repairs
- Concrete bedding
- Pre-fabricated bathroom unit (PBU) grouting
- Partitions
- Bridge bearing plates
BENEFITS
- Cost effective
- Positive expansion
- Excellent initial flow and flow retention
- Non-staining natural aggregates
- Chloride free
- No segregation
- Pre-packed material overcomes potential on-site batching variations
- High early strength
SmartNS Grout SP
Non-Shrink Grout for Semi-Precast and Repair
SmartNS Grout SP is a pre-packed single component cementitious grout. It is non-shrink and chloride-free, consists of graded sand, cement and chemical additives. It is ideal for in-situ connection, small patch repairs.
-
More Info
FIELDS OF APPLICATION
- Wall panel joint mortar grout
- Chloride wall patch repairs
- Filling of precast joints and gaps
- Floor patching
- Base plate grouting and anchoring for anchor bolts and bridge bearing plates
BENEFITS
- Non-shrink
- Chloride free
- Good workability
- Pre-packed which allows for convenient handling and therefore minimizing the error of on-site mixing
- Suitable for interior and exterior applications.
SmartNS Grout HS
High Strength Grout For Precision Grouting
SmartNS Grout HS is a pre-packed single component cementitious grout. It is double shrinkage compensated and chloride-free. It contains graded sand, cement and chemical additives. It is ideal for base plate grouting where both high strength and highly flowable consistency are required at the same time.
-
More Info
FIELDS OF APPLICATION
- Base plate and equipment support
- Bridge bearing plates
- Anchor bolting
- Crane rails base
- Concrete repairs
- Pre-packed grouting
- Pre-stressed tendon
BENEFITS
- Rapid development of strength and high ultimate strength
- Shrinkage compensated (pre-hardening and post hardening)
- Flowable to pump consistency
- Pre-packed and pre-mixed to allow for convenient handling in mixing and minimizes any error of on-site blending (e.g use of grout aid)
- No segregation and bleeding
- Chloride free
SmartNS Grout HF
High Fluidity Non-Shrink Grout
SmartNS Grout HF is a high flow cementitious grout suited for a wide range of grouting needs. It is non-shrink and chloride free. It consists of selected sand, cement and chemical additives. SmartNS Grout HF is a cost effective grout with high fluidity. It is extremely flowable for use with gaps width of 10 to 100mm. When cured, it is similar in appearance to concrete.
-
More Info
FIELDS OF APPLICATIONS
SmartNS Grout HF is used for free-flow, positive expansion grouting in a wide range of applications such as :- Base plates
- Hand rails
- Anchor bolts
- Bridge bearing plates
- Machine bases of all types
- Pressure grouting
- Structural members such as precast wall panel, beam and column / retaining walls
- Concrete repairs
- Pre-fabricated bathroom units (PBU) grouting
BENEFITS
- High fluidity
- Positive expansion
- No segregation
- Chloride free
- Pre-packed for convenience and factory assured quality
SmartNS Grout 100
High Strength Pressure Grouting
SmartNS Grout 100 is our premium high strength cementitious non-shrink grout that is specially designed for pressure grouting. It consists of selected sand, cement and chemical additives to provide a free flowing and non-shrink grout with excellent strength performance. When cured, it is similar in appearance to concrete.
-
More Info
FIELDS OF APPLICATION
SmartNS Grout 100 is used for free-flow, non-shrink grouting in a wide range of applications such as :
- Cable grouting
- Anchor bolts
- Structural members such as precast wall panels, beam and columns, retaining walls
- Concrete repairs
- Crane rail assembly
- Under-plate grouting
- Bedding of machine plates
BENEFITS
- Highly flowable
- Non-bleeding
- Non-shrink
- Pre-packed convenience and factory assured quality
- Consistent high strength performance
- High early and ultimate strength
SmartGrout MHF
High-Tolerance Non-Shrink Grout
SmartGrout MHF is a high-flow metallic grout. It is designed for use in applications requiring high tolerance, high strength and high flowability. SmartGrout MHF is formulated as a metallic aggregate system with a special binder for positive expansion. It is highly flowable without sacrificing strength or performance capabilities and provides consistent and exacting performance in critical grouting operations.
-
More Info
FIELDS OF APPLICATION
- Grouting for heavy duty service conditions
- Grouting of machinery subjected to vibrations
- Structural support
BENEFITS
- Reinforced with metallic aggregates
- Highly flowable for ease of use on site
- High strength for maximum load bearing
- High tolerance (with minimum positive expansion)
- Non-bleeding and non-segregating
SmartGrout LA
High Flow Micro-Concrete Grout
SmartGrout LA is a highly flowable cementitious grout specifically designed for structural repairs of concrete structures, both small and large repairs of more than 50 mm and up to 100 mm in thickness. SmartGrout LA is also suitable for repairs where chloride or sea water resistance is required. The pouring or pumping consistency is suitable for difficult to reach area or where heavy reinforcement bars are present. It is a non-shrink and chloride free micro-concrete grout. SmartGrout LA consists of selected aggregates, sand, cement and chemical additives. When cured, it is similar in appearance to concrete.
-
More Info
FIELDS OF APPLICATION
SmartGrout LA is used for free-flow, positive expansion grouting repair applications such as :- Dock or jetty beams, columns and pile caps
- Sea water, sulphate resistant structures
- Precast concrete canals
BENEFITS
- High fluidity, low water demand
- Double shrinkage compensated
- No segregation
- Pouring or pumping consistencies
- Grade C60 strength
- Able to cover difficult to reach areas
- Chloride free formulation
- Pre-packed convenience for ease of use on-site
- Factory assured quality
SmartShear Key Grout
Dry Mixed Cementitious Grout
SmartShear Key Grout is a pre-packed cement based grout that replaces the traditional on site mixes of cement and sand. It is recommended for jointing of hollow core slabs. It contains cement, graded sand and chemical additives giving the user an easily workable wet mix.
-
More Info
FIELDS OF APPLICATION
- Hollow core slabs
- Suitable for both interior and exterior applications
BENEFITS
- Excellent strength and crack control
- Suitable workability with extended working time
- Excellent flow consistency with recommended water addition
- Consistent factory quality controlled product