Integral Waterproofing

SmartPruf

Integral Waterproofing System

SmartPruf is a two-component, integral water-proofing system of admixtures which ensures water tightness in structural and precast concrete. It is added to the concrete mix during batching. SmartPruf concrete serves as a continuous and permanent barrier to water ingress. It is corrosion resistant and practically impermeable to water and aggressive chemicals. SmartPruf concrete is highly workable; ensuring easy placing and compaction.

  1. More Info

    FIELDS OF APPLICATION

    SmartPruf may be used for water-proofing of all types of structures and pre-cast concrete under severe ground water conditions. It is especially suited for :

    • Sub-structures such as basements, tunnels and lift pits
    • Decks such as environmental decks and suspended swimming pools
    • Water-retaining structures such as swimming pools or water tanks

     

    BENEFITS

    • Reduces capillary absorption
    • Resist hydro-static pressure
    • Permanent water-proofing barrier
    • Substantial savings of time and costs
    • Approved for contact with potable water
    • Compatible with BS 146, BS 4264 slag cement mass concrete

    Data Sheet

SmartPruf MSF

Water-proofing Powder Admixture

SmartPruf MSF is a water-proofing powder admixture which provides water tightness in structural and pre-cast concrete. It is added to the concrete mix during batching.

SmartPruf MSF is a unique hydrophobic silica fume cum ultra-fine pore densifier that crystallizes and ensures permanent barrier to water ingress. It limits water penetration under pressure and keeps capillary water absorption to a very low value. This property is especially critical for concrete surfaces that are exposed to wet and dry cycles, sometimes called splash zones.

SmartPruf MSF water-proofing concrete becomes corrosion resistant and impermeable to aggressive salts. SmartPruf MSF can be used with normal concrete admixtures, producing a highly workable concrete for easy placing and compaction on job site.

  1. More Info

    FIELDS OF APPLICATION

    SmartPruf MSF is used for water-proofing of all types of structural and pre-cast concrete under severe hydro-static conditions. It is especially suited for :

    • Marine structures such as bridges, docks, jetties and ocean outflow pipes
    • Sewage canals such as canal walls or bases
    • Water retaining structures such as swimming pools or water tanks
    • Sub-structures such as basements and tunnels
    • Decks such as environmental decks

     

    BENEFITS 

    • Integral water-proofing concrete
    • Reduce capillary absorption
    • Reduce pressure water penetration
    • Stops chloride ion penetration
    • Very low permeability concrete
    • No strength loss
    • Compatible with GGBS slag cement

    Data Sheet

SmartPruf CRS

Crystalline capillary waterproofing system

SmartPruf CRS is a brush or spray applied coating for water-proofing and protection of concrete or sand / cement render. SmartPruf CRS is cement-based, supplied in powder form and formulated from Portland cement, fine quartz sand and active chemicals. The chemicals require the pressure of water in the capillaries in order to penetrate and form sealing crystals.

SmartPruf CRS is a unique chemical treatment for the water-proofing, protection and repair of concrete. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or two-coat application. SmartPruf CRS prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of the concrete and cement-based materials.

  1. More Info

    FIELDS OF APPLICATION

    • Reservoirs
    • Subway tunnels
    • Sewage treatment and water treatment plants or tanks, foundations, pipes, tunnels and manholes
    • Power plants tanks, foundations, tunnels, control rooms and manholes
    • Foundation, parking decks and planter boxes of industrial plants and office buildings

     

    BENEFITS

    • Contains no chlorides
    • Approved for use with potable water
    • Suitable for both interior and exterior applications
    • Water-proofing remains even if concrete surfaces are damaged
    • Penetrates concrete, seals capillary tracts and hairline cracks
    • Effective treatment for hydro-static conditions
    • Resists chemical attacks from sewerage and industrial wastes

    Data Sheet

SmartGuard

Waterproofing Liquid Admixture

SmartGuard is a one-component, integral waterproofing admixture which combines a hydrophobic ingredient with a water-reducing admixture. It can be used to provide water tightness in mortars and concrete. SmartGuard is both water-proof (permeability reducer) and damp-proof (water-repellent). The addition of SmartGuard will result in a corrosion-resistant mortar / concrete with greatly reduced permeability to water and aggressive chemicals.

  1. More Info

    FIELDS OF APPLICATION

    SmartGuard can be used as a water-proofing additive for :

    Mortar

    • Floor screed for wet areas, roofs and decks
    • Damp-proofing slurry and mortar for walls, wall panels, water-proof grouts

     

    Concrete

    • Basements, tunnels and lift pits
    • Fountain pools and water tanks

     

    BENEFITS

    • Highly reduces water absorption
    • Low water permeability
    • Easy to use
    • Improves workability
    • Chloride free
    • Non-toxic

    Data Sheet